Nanjing Xianou Laboratory Incubator is widely used in medical, pharmaceutical and chemical test, electronic, national defense, precision instrument and meter industry for operational area with air purification.

Laboratory Incubator 's key features:

1.Composed of constant temperature incubator,anaerobic operation box,sampling box,gas road and circuit control systems;

2.By advanced scientific means to achieve high precision,constant temperature anaerobic environment;

3.The pneumatic device can be arbitrary regulation flow,can input any kinds of needed gas;

4.The operation box is made of stainless steel plate,and the front window using transparent glass;
 

5.Supply the special glove which is comfortable,flexible and easy to use.

If start to work with incubator,should input some water in the constant temperature water tank,and switch on the power,stirring to work,then choose the temperature,setting the working temperature:press the SET button to set or check the temperature value.Press the SET key,the digital tube character starts flashing,means the instrument meter steps into setting state,press "△" to increase the value and press "▽" to decrease the value;if press the two keys lasting few seconds,the data values will change fast.And press the SET key once again,the instrument meter will back to work state,and temperature setting is completed.

If the temperature's setting value is higher than water's,the heating indicator is lighting,and shows the heater is beginning to work.So,the digital value is the real water temperature,when the water reaches the setting value,the indicator light will go out,and the heater stops working.After heating,it will take few minutes to keep the water temperature constant.