Centrifugal tube adapter
Product Introduction:
Non contact ultrasonic disruptor, also known as ultrasonic DNA slicer/ultrasonic DNA disruptor, is based on the principle of using dry ultrasonic transmission technology to directly penetrate the centrifuge tube, completely within the range of ultrasonic waves, instead of using traditional liquid as a carrier to penetrate the centrifuge tube. The disadvantages of ultrasonic energy dispersion, non focusing, and low utilization rate are that during the experiment, the samples are placed in independent fully sealed centrifuge tubes, and there is no cross contamination between the samples, avoiding the propagation of aerosol and enhancing the biological safety of the experiment.
This instrument has a wide range of applications, mainly for cell fragmentation, lysis, and release of cellular content particles. Taking the research institute that cooperates with our company as an example, this instrument is particularly suitable for the release of adenovirus particles, the preparation of highly efficient recombinant adenovirus, and the preparation of viral DNA and DNA terminal protein compounds. It is also an ideal instrument for soil sample preparation. It has become an indispensable standardized tool for CHIP (chromatin immunoprecipitation) research platform.
The main advantages of this instrument are as follows:
(1) Simultaneous processing of multiple samples;
(2) Overcoming the shortcomings of traditional methods that are prone to pollution;
(3) Sealed sample processing that does not produce infectious flying mist;
(4) The largest sample volume can be obtained in a short period of time;
(5) Zui can process up to 12 samples simultaneously;
(6) Good repeatability and high experimental efficiency;
(7) Uniform distribution of ultrasound energy;
(8) Do not destroy the basic characteristics of cellular contents.
Technical parameters:
1. Frequency: 20KHz automatic tracking.
2. Ultrasonic power: 3500W.
3. Reaction volume: stainless steel.
4. Single standard crushing capacity ml: 0.5ml * 12 samples.
5. Optional centrifuge tube bracket: non-standard options such as 1.5ml tube * 8 holes or 2ml tube * 8 holes.
6. Constant temperature range: 0 ¡æ~50 ¡æ.
7. Ultrasonic start/pause dual timer: The touch screen can set the time arbitrarily.
8. Ultrasonic frequency: 35KHz.
9. Continuous ultrasound function: Yes.
10. Instrument protection function: over temperature, over power, over time.
11. Ultrasound/gap time setting: 0.1~99.9 seconds.
12. Total time range: 1 S~99H59M59 S.
13. Ultrasonic continuous working mode: Yes.
14. Temperature control function: Yes.
15. Display and control mode: 7-inch touch screen TFT.
16. The sample needs to be crushed in a closed container without the need for an additional ultrasonic probe, without generating infectious flying mist, and without causing cross contamination between samples.
17. Equipped with a silencing and compression device.
18. Power supply voltage: AC220V/50HZ¡£
19. Equipped with computer communication function.
20. Configuration requirements: Touch screen ultrasonic generator; Stainless steel sample processing room (including ultrasonic transducer and soundproof cover); Low temperature system; Standard adapter.